The Sho-Rate 1350 and 1355 Series of low flow indicators provides a cost-effective means of flow indication for both 5% (Model 1355) and 10% (Model 1350) accuracy requirements. Available options include the Standard or NRS integral needle control valves, as well as flow controllers on the inlet or outlet of single tube meters. Multi-tube configurations with or without needle control valves, with individual connections or with manifolding of the inlet or outlet ports are also available.
FEATURES
Ten-to-one rangeability
Heavy-wall, precision bore, borosilicate glass metering tubes
A wide range of scales on the metering tube with contrasting background for easy readability
Tubes sealed on compression gasket by threaded seal spindle
Tubes removable without disconnecting instrument
Integral float stops prevent loss of float during tube removal
Interchangeable tubes and floats
Single tube or multi-tube configurations available
These Sho-Rate flowmeters are Variable Area, Glass Tube, flow rate indicating meters for both gas and liquid service. The basic elements are a tapered glass metering tube and a metering float. Features include quick and simple removal or installation of the tube and float while the meter remains in the process piping.
SPECIFICATIONS
Capacities
Please consult the detailed Data Sheet
Accuracy
1350 Series Standard: Accuracy of ±10% of full scale from 100% to 10% of scale reading.
1355 Series Standard: ±5% of full scale from 100% to 10% of scale reading.
Repeatability
0.5% full scale
Rangeability
10 to 1
Pressure
200 PSIG at temperatures up to 250°F
Scales
1350 Series: Length 65mm, nominal. Graduations: 0-65mm, or 0-100 linear
reference scale with air or water calibration table.
1355 Series: Length: 150mm, nominal. Graduations: 0-150mm, or 0-100 linear reference scale with air or water calibration table.
Optional: for either 65 mm or 150 mm direct reading scale, ceramic ink fused on glass tube or metal scale plate mounted beside tube.
Connections
- Standard: Horizontal female 1/8" NPT threaded adapters with locknuts for front of panel mounting.
- Multi-tube meters: Individual 1/8" NPT horizontal inlet and outlet; Manifold connection 1/8" NPT on inlet with individual outlet or manifold outlet with individual inlet connections.
Materials of Construction
Metering Tubes: Borosilicate glass
Floats: Glass, 316 SS, sapphire, Carboloy?, Tantalum
End fittings: Chrome plated brass, black anodized aluminum, 316 SS
Side Plates: Black anodized aluminum, 316 SS
Window: Clear polycarbonate; Back Window: Milk white polycarbonate
O-rings: Buna-N (Brass and aluminum meters), Viton-A (316 SS meters), Teflon (not available with needle valves), EPM, Kalrez?
OPTIONAL EQUIPMENT
Standard integral flow control valve on inlet or outlet.
Cannot be installed on manifolded fittings.
NRS integral flow control valve on inlet or outlet. These valves are particularly suitable for precise control requirements, and are recommended for flow rates below 500 sccm of Air (@STP) or 10 cc/min
water. Cannot be installed on manifolded fittings.
Flush mounting bezels in aluminum (single tube) or plastic (multi-tube).
Threaded adapters and locknuts for front of panel mounting (standard with 1/8" NPT).
Multi-tube construction up to 6 tubes
1/8" and 1/4" compression fittings
1/4" female NPT connections
1/4" ID serrated hose connections
Base plates, with or without level