Home
  Profile
  News
  Contact
  Brands
  Products by Category
  Products by Industry
 
 

 
Request more info

 
Print it

CTRLink Unmanaged Switching Hub "Blue-Line" EICB Series

The EICB product line is designed with high port density for minimum space consumed. With a constant form factor requiring only 1.75" of DIN-rail space, these switches can support 16 or 24 ports with copper and fiber/copper combinations in a rugged aluminum enclosure. Built for a temperature range from to +60°C, the EICB switches will operate successfully in most demanding applications.

The EICB segments the Ethernet LAN into multiple collision domains functioning as a "bridge" between data links to create a larger network diameter than can be achieved with repeating hubs. Each port automatically negotiates with its link partner the data rate to be 10 Mbps or 100 Mbp and either half- or full-duplex operation. Full-duplex negotiation implements the PAUSE method of flow control. Half-duplex links use backpressure for flow control.

The switch learns port assignments by reading Ethernet frames and logs source addresses into a table which can hold more than 8,000 in the 16-port unit and more than 12,000 in the 24-port unit. With this information, it improves throughput by restricting traffic to only those ports party to a data exchange - while other data is simultaneously exchanged on other ports. Store-and-forward operation of frames is implemented using 512 kB of built-in memory in the 16-port unit and 768 kB of built-in memory in the 24-port unit.

Only standard straight-through cables are needed to connect the copper ports to stations or another hub since the copper ports on the EICB are Auto-MDIX compliant; meaning, that any port can function as an uplink port to another switch or end-station. In addition to one power LED, each port has an LED showing link/activity/data rate by color: green for 100 Mbps and yellow for 10 Mbps. Flashing indicates the port activity.

The EICB is shipped with a DIN-rail clip installed. If direct mounting to a sub-panel is desired, the DIN-rail clip is removed and the attached mounting ears can be extended to provide panel mounting.

The unit can be operated from a wide range, low-voltage AC or DC power sources. Redundant power connections are provided to accommodate back-up schemes.

Features:
• Plug and Play operation (PnP)
• Consistent panel space for 16 or 24 ports
• 10BASE-T/100BASE-TX/ 100BASE-FX compliant
• Wide operating temperature range (0°C to +60°C)
• Auto-negotiated or static data rate, duplex and flow control
• Full- or Half-duplex operation on twisted-pair ports
• Auto-crossover (Auto-MDIX) on twisted-pair ports
• Wide-range, low-voltage AC (8-24V) or DC (10-36V) powered
• Provision for redundant power connections
• LEDs for link, activity, data rate, power and status
• Easy panel or DIN-rail installation
• Industrial environment EMC compatible
• CE Mark
• UL 508 Listed
• C-UL Listed, CSA C22.2 No. 14-M91

Available Models:
• EICB16-100T Sixteen-port 10BASE-T/100BASE-TX switching hub
• EICB16-100T/FC Fourteen-port 100BASE-TX/two-port 100BASE-FX (multimode) switching hub w/ SC connectors
• EICB16-100T/FT Fourteen-port 100BASE-TX/two-port 100BASE-FX (multimode) switching hub w/ ST connectors
• EICB16-100T/FJ Fourteen-port 100BASE-TX/two-port 100BASE-FX (multimode) switching hub w/ MT-RJ connectors
• EICB16-100T/FCS Fourteen-port 100BASE-TX/two-port 100BASE-FX (single-mode) switching hub w/ ST connectors
• EICB16-100T/FLS Fourteen-port 100BASE-TX/two-port 100BASE-FX (single-mode) switching hub w/ LC connectors
• EICB24-100T Twenty-four port 10BASE-T/100BASE-TX switching hub
• EICB24-100T/FC Twenty-two port 100BASE-TX/two-port 100BASE-FX (multimode) switching hub w/ SC connectors
• EICB24-100T/FT Twenty-two port 100BASE-TX/two-port 100BASE-FX (multimode) switching hub w/ ST connectors
• EICB24-100T/FJ Twenty-two port 100BASE-TX/two-port 100BASE-FX (multimode) switching hub w/ MT-RJ connectors
• EICB24-100T/FCS Twenty-two port 100BASE-TX/two-port 100BASE-FX (singlemode) switching hub w/ SC connectors
• EICB24-100T/FLS Twenty-two port 100BASE-TX/two-port 100BASE-FX (singlemode) switching hub w/ LC connectors

 

 
Request more info

 
Print it

 
© 2004 - 2024 Indmac All rights reserved. | Terms of use | Privacy Policy | Become a Partner Hosted & Created by Vistoweb